ASPHALT PENETRATION PAINTS PENETRAL

ASPHALT PENETRATION PAINTS PENETRAL

This group of asphalt products consists of asphalt substance dissolved in an organic dissolvent. At normal temperatures penetration paints have the form of black low-viscosity liquids free of water and mechanical impurities. They penetrate deep to the pores of the base material and create a strong connection with other insulating layers. After the dissolvent evaporates, asphalts in penetration paints have good adhesive properties to all construction base materials (concrete, metal, walls, etc.). The created asphalt film is very thin and does not have sufficient waterproofing capacity yet and is not capable of reliably and permanently protecting the construction against the effects of water.

ALP – Асфальтова проникаюча фарба

Використання: Для просочування сухих та чистих поверхонь під асфальтові покриття, водонепроникні смуги та ізоляцію.

ALP-M – Модифікована асфальтова проникаюча фарба

Use: for penetration of base materials where waterproofing from modified asphalts will be applied. It also contains an adhesive admixture for humidity. It ensures adhesion to mildly wet base materials. It also ensures higher tear strength between layers.

Processing: asphalt penetration paints are processed cold. They are applied by a paint brush or a roofing brush. Spraying and dipping application methods are also acceptable. Thoroughly stir the content before use. The consumption depends on the method of use and on the suction capacity of the base material: 0.2 to 0.3 kg/m3. Apply only as much of the penetration paint as can be absorbed by the base material or to cover the base material by a thin layer of asphalt. A common mistake during application to uneven closed surfaces is the formation of puddles with a thicker layer of dried soft asphalt with low cohesion that can cause defects.

Packaging and storage: supplied in 3.5 and 9 kg cans, 20 kg buckets, 160 kg (200 l) barrels and in railroad and truck cisterns of customers. They are stored in sealed packages in sheltered warehouses. Paint containers must not be exposed to high temperatures or direct sunlight. Acceptable thickening of the paint during storage is up to 50 %. Do not dilute, everything is ready for use from the producer.